Table 28: Global Policy Parameters - Network Settings - Grandstream Networks UCM630 Series User Manual

Security
Disable Telnet/SSH
Syslog
Syslog Server
Syslog Level
Send SIP Log
Basic Settings
IP Address
Host Name
Vendor Class ID
Account ID
Password
Service Name
Advanced Setting
Layer 3 QoS
Layer 2 QoS Tag
Layer 2 QoS Priority Value
STUN Server
Keep Alive
Enable Telnet/SSH access for the SIP end device. If the SIP end device
supports Telnet access, this option controls the Telnet access of the device;
if the SIP end device supports SSH access, this option controls the SSH
access of the device.
Configure the URL/IP address for the syslog server.
Select the level of logging for syslog.
Configure whether the SIP log will be included in the syslog message.
Table 28: Global Policy Parameters – Network Settings
Configure how the SIP end device shall obtain the IP address. DHCP or
PPPoE can be selected.

DHCP
Once selected, users can specify the Host Name (option 12) of the SIP
end device as DHCP client, and Vendor Class ID (option 60) used by
the client and server to exchange vendor class ID information.

PPPoE
Once selected, users need specify the Account ID, Password and
Service Name for PPPoE.
Specifies the name of the client. This field is optional but may be required
by Internet Service Providers.
Used by clients and servers to exchange vendor class ID.
Enter the PPPoE account ID.
Enter the PPPoE Password.
Enter the PPPoE Service Name.
Define the Layer 3 QoS parameter. This value is used for IP Precedence,
Diff-Serv or MPLS. Valid range is 0-63.
Assign the VLAN Tag of the Layer 2 QoS packets.
Valid range is 0 -4095.
Assign the priority value of the Layer 2 QoS packets.
Valid range is 0-7.
Configure the IP address or Domain name of the STUN server. Only non-
symmetric NAT routers work with STUN.
Select either to enable or disable Keep Alive.
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 98