Table 44: Fxs Extension Configuration ParametersMedia - Grandstream Networks UCM630 Series User Manual

Verification
Send voicemail messages to the configured email address. If set to "Default", the
Send Voicemail to
global setting will be used. Global settings can be found in Voicemail->Voicemail
Email
Email Settings.
Keep Voicemail
Only applies if extension-level or global Send Voicemail to Email is enabled.
after Emailing
Emergency Calls
CallerID number that will be used when calling out and receiving direct callbacks.
CID
If selected, this extension will be disabled on the UCM630X.
Disable This
Note: The disabled extension still exists on the PBX but cannot be used on the end
Extension
device.
User Settings
Configure the first name of the user. The first name can contain characters, letters,
First Name
digits and _.
Configure the last name of the user. The last name can contain characters, letters,
Last Name
digits and _.
Email Address Fill in the Email address for the user. Voicemail will be sent to this Email address.
Configure the password for user portal access. A random numeric password is
User Password automatically generated. It is recommended to use the randomly generated password
for security purpose.
Mobile Phone
Configure the Mobile number of the user.
Number
Select the voice prompt language to be used for this extension. The default setting is
"Default" which is the selected voice prompt language under Web GUIPBX
SettingsVoice PromptLanguage Settings. The dropdown list shows all the
Language
current available voice prompt languages on the UCM630X. To add more languages
in the list, please download voice prompt package by selecting "Check Prompt List"
under Web GUIPBX SettingsVoice PromptLanguage Settings.
Analog Settings
Call Waiting Configure to enable/disable call waiting feature. The default setting is "No".
If configured, the # key can be used as SNED key after dialing the number on the
User '#' as SEND
analog phone. The default setting is "Yes".
Configure the RX gain for the receiving channel of analog FXS port. The valid range
RX Gain
is -30dB to +6dB. The default setting is 0.
Configure the TX gain for the transmitting channel of analog FXS port. The valid range
TX Gain
is -30dB to +6dB. The default setting is 0.
Table 44: FXS Extension Configuration ParametersMedia
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 131