Configure Private Intercom; Table 82: Announcement Paging Configuration Parameters; Figure 161: Private Intercom - Grandstream Networks UCM630 Series User Manual

Enable
Name
Type
Custom Prompt
Repeat
Date
Time
Transmission Method
Members

Configure Private Intercom

Private Intercom is a new paging type that is meant to be used with Grandstream GSC3510. In a private intercom:

The initiator can be heard by all parties

The initiator can hear only one of the intercom members, which is determined by whose audio is initially
detected. Audio from other members cannot be heard until the first responder is done talking.

Intercom members can hear only the initiator's audio and no other intercom members

Table 82: Announcement Paging Configuration Parameters

Enable/Disable Announcement Paging.
Configure paging/intercom group name.
Select "Announcement Paging"
This option is to set a custom prompt for a paging/intercom group to announce
to caller. Click on 'Prompt', it will direct the users to upload the customized voice
prompts.
Note: Users can also refer to the page PBX SettingsVoice PromptCustom
Prompt, where they could record new prompt or upload prompt files.
If enabled, the announcement page will be repeated for the selected weekdays.
Configure Announcement Paging Date.
Configure Announcement Paging Time.
Configure Announcement Paging transmission method.
Unicast: Depending on members selection
Multicast: Depending on Multicast IP address and Port
Select available users from the left side to the paging/intercom group member
list on the right.

Figure 161: Private Intercom

UCM630X Series User Manual
Version 1.0.2.25
P a g e | 252