Note: Users can export outbound route blacklists and delete all blacklist entries. Additionally, users can also
import blacklists for outbound routes.
Scheduled Sync
The UCM630X allows users to synchronize the outbound routes, this feature can be found on the
WebGUIExtension/TrunkOutbound Routes Scheduled Sync.
Scheduled Sync
Server Address
File Name
Sync Time
Sync Frequency
PIN Groups
The UCM630X supports pin group. Once this feature is configured, users can apply pin group to specific
outbound routes. When placing a call on pin protected outbound routes, caller will be asked to input the group
pin number, this feature can be found on the WebGUIExtension/TrunkOutbound RoutesPIN Groups.
Name
Record In CDR
PIN Number
PIN Name
Figure 106: Blacklist Import/Export
Table 63: Outbound Routes/Scheduled Sync
Enable the Scheduled Sync feature
Enter the TFTP server address. For example, "192.168.1.2:69".
Specify the file name
Enter the sync time (24hr format). Valid range is 0-23.
Create new sync every x day(s). The valid range is 1 to 30.
Table 64: Outbound Routes/PIN Group
Specify the name of the group
Specify whether to enable/disable record in CDR
Specify the code that will asked once dialing via a trunk
Specify the name of the PIN
UCM630X Series User Manual
Version 1.0.2.25
P a g e
|
192