Web Info
SSH Switch
Use the LED Indicators
The UCM6301/6302 has LED indicators on the network port to display connection status and the following picture
shows the other ports status.
The UCM6304/6308 has LED indicators in the front to display connection status. The following table shows the
status definitions.
LED Indicator
Power 1/Power 2
PoE
LAN
WAN
USB
SD
FXS ports
FXO ports
Hardware Testing
Select Test SVIP to verify hardware connections within the device. The
result will display on the LCD when the test is complete.
Protocol: Web access protocol (HTTP/ HTTPS). HTTPS is used by default.
Port: Web access port number, which is 8089 by default.
Enable SSH
Disable SSH
SSH access is disabled by default
Figure 10: Ports Status
Table 4: UCM6304/6308 LED Indicators
LED Status
Solid: Connected
Fast Blinking: Data Transferring
Slow Blinking: Trying to connect
OFF: Not Connected
UCM630X Series User Manual
Version 1.0.2.25
P a g e
|
38