Table 3: Lcd Menu Options - Grandstream Networks UCM630 Series User Manual


View Events




Device Info






Network Info



Network Menu





Factory Menu



Table 3: LCD Menu Options

Critical Events
Other Events
Hardware: Hardware version number
Software: Software version number
P/N: Part number
WAN MAC: WAN side MAC address
LAN MAC: LAN side MAC address
Uptime: System uptime
WAN Mode: DHCP, Static IP, or PPPoE
WAN IP: IP address
WAN Subnet Mask
LAN IP: IP address
LAN Subnet Mask
WAN Mode: Select WAN mode as DHCP, Static IP or PPPoE
Static Route Reset: Select this to reset static route settings.
Reboot
Factory Reset
LCD Test Patterns
Press DOWN and OK buttons to scroll through and select different LCD
patterns to test. Once a test is done, press the OK button to return to the
previous menu.
Fan Mode
Select Auto or On.
LED Test Patterns
All On, All Off, and Blinking are the available options. Selecting Back in the
menu will revert the LED indicators back to their actual status.
RTC Test Patterns
Select either 2022-02-22 22:22 or 2011-01-11 11:11 to start the RTC (Real-
Time Clock) test pattern. Check the system time from either the LCD idle
screen or in the web portal System StatusSystem InformationGeneral
page. To revert back to the correct time, manually reboot the device.
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 37