Create New Iax Extension; Table 38: Iax Extension Configuration ParametersBasic Settings - Grandstream Networks UCM630 Series User Manual

Number Number". The selected dial plan should have permissions to dial the defined external
number.
Dialing Order This is the order in which the Follow Me destinations will be dialed to reach the user.

Create New IAX Extension

The UCM630X supports Inter-Asterisk eXchange (IAX) protocol. IAX is used for transporting VoIP telephony
sessions between servers and terminal devices. IAX is like SIP but also has its own characteristic. For more
information, please refer to RFC 5465.
To manually create new IAX user, go to Web GUIExtension/TrunkExtensions. Click on "Add" and a new
dialog window will show for users which need to make sure first to select the extension type to be IAX Extension
before proceeding to fill in the extension information. The configuration parameters are as follows.
General
Extension The extension number associated with the user.
Configure the CallerID Number that would be applied for outbound calls from this
user.
CallerID Number
Note: The ability to manipulate your outbound Caller ID may be limited by your VoIP
provider.
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
Permission setting is "Internal".
Note: Users need to have the same level as or higher level than an outbound rule's
privilege to make outbound calls using this rule.
Configure the password for the user. A random secure password will be automatically
SIP/IAX Password
generated. It is recommended to use this password for security purpose.
Configure Voicemail. There are three valid options and the default option is "Enable
Local Voicemail".
Voicemail
Configure voicemail password (digits only) for the user to access the voicemail box.
Voicemail
A random numeric password is automatically generated. It is recommended to use
Password
the random generated password for security purpose.
Skip Voicemail
When user dials voicemail code, the password verification IVR is skipped. If enabled,
Password
this would allow one-button voicemail access. By default, this option is disabled.
Verification
Send voicemail messages to the configured email address. If set to "Default", the
Send Voicemail to
global setting will be used. Global settings can be found in Voicemail->Voicemail
Email
Email Settings.
Table 38: IAX Extension Configuration ParametersBasic Settings

Disable Voicemail: Disable Voicemail.

Enable Local Voicemail: Enable voicemail for the user.
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 125