Alert Contact - Grandstream Networks UCM630 Series User Manual

Alert Contact

This feature allows the administrator to be notified when one of the Alert events mentioned above happens.
Users could add administrator's Email address under Web GUIMaintenanceSystem EventsAlert
Contact to send the alert notification to an email (Up to 10 Email addresses can be added) or also specify an
HTTP server where to send this alert.
Super Admin Configure the email addresses to send alert notifications to.
Email Up to 10 email addresses can be added.
Admin Email Configure the email addresses to send alert notifications to.
Up to 10 email addresses can be added.
Email Template Please refer to section Email Templates
Protocol Protocol used to communicate with the server. HTTP or HTTPS.
Default one is HTTP.
HTTP Server The IP address or FQDN of the HTTP/HTTPS server.
HTTP Server Port HTTP/HTTPS port
Warning Template Customize the template used for system warnings.
By default:
{"action":"${ACTION}","mac":"${MAC}","content":"${WARNING_MSG}"}
Notification Customize the notification template to receive relevant alert information.
Template By default:
{"action":"${ACTION}","cpu":"${CPU_USED}","memery":"${MEM_USED}","disk":"${
DISK_USED}","external_disk":"${EXTERNAL_DISK_USED}"}
Figure 268: Filter for Alert Log
Table 137: Alert Contact
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 378