Batch Add Iax Extensions; Table 49: Batch Add Iax Extension Parameters - Grandstream Networks UCM630 Series User Manual

If disabled, UCM will not invite the extension when it is already in a call and will do
the same work as the user is busy.
Call Waiting
Note: the option only works when the caller dials the extension directly.

Batch Add IAX Extensions

Under Web GUIExtension/TrunkExtensions, click on "Add", then select extension type as IAX Extension
and the add method to be Batch.
General
Create Number Specify the number of extensions to be added. The default setting is 5.
Extension Select how much to increment successive extensions. For example, if the value is 2,
Incrementation the extensions will be 1000,1002,1004,......
Extension The extension number associated with this particular user/phone.
Assign permission level to the user. The available permissions are "Internal", "Local",
"National" and "International" from the lowest level to the highest level. The default
setting is "Internal".
Permission
Note: Users need to have the same level as or higher level than an outbound rule's
privilege in order to make outbound calls from this rule.
Configure the Caller ID number displayed when dialing calls from this user. Note:
CallerID Number The Caller ID usage might be limited by your VoIP provider. In Batch Add Method,
"e" means to use the extension as the number.
Configure Voicemail. There are three valid options and the default option is "Enable
Local Voicemail".
Voicemail
Configure the SIP/IAX password for the users. Three options are available to create
password for the batch of extensions.

SIP/IAX Password


Configure Voicemail password (digits only) for the users.

Voicemail
Password

Table 49: Batch Add IAX Extension Parameters


Disable Voicemail: Disable Voicemail.

Enable Local Voicemail: Enable voicemail for the user.
User Random Password.
A random secure password will be automatically generated. It is recommended
to use this password for security purpose.
Use Extension as Password.
Enter a password to be used on all the extensions in the batch.
User Random Password.
A random password in digits will be automatically generated. It is recommended
to use this password for security purpose.
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 143