Iax Settings; Iax Settings/General; Iax Settings/Registration; Table 112: Iax Settings/General - Grandstream Networks UCM630 Series User Manual

Enterprise-grade unified communication solutions
Hide thumbs Also See for UCM630 Series:
Table of Contents

Advertisement

The UCM630X IAX global settings can be accessed via Web GUIPBX SettingsIAX Settings.

IAX Settings/General

Bind Port
Bind IPv4 Address
Bind IPv6 address
IAX1 Compatibility
No Checksums
Delay Reject
ADSI
Music On Hold
Interpret
Music On Hold
Suggest
Bandwidth

IAX Settings/Registration

IAX Registration Options
Min Reg Expire
Max Reg Expire
IAX Thread Count
IAX Max Thread Count

IAX SETTINGS

Table 111: IAX Settings/General
Configure the port number that the IAX2 will be allowed to listen to. The default
setting is 4569.
Force IAX2 to bind to a specific address instead of all addresses.
Configure the IPv6 address to bind to. "[::]" means to bind to all IP addresses.
Select to configure IAX1 compatibility. The default setting is "No".
If selected, UDP checksums will be disabled and no checksums will be
calculated/checked on systems supporting this feature. The default setting is
"No".
If enabled, the IAX2 will delay the rejection of calls to avoid DOS. The default
setting is "No".
Select to enable ADSI phone compatibility. The default setting is "No".
Specify which Music On Hold class this channel would like to listen to when being
put on hold. This music class is only effective if this channel has no music class
configured and the bridged channel putting the call on hold has no "Music On
Hold Suggest" setting.
Specify which Music On Hold class to suggest to the bridged channel when
putting the call on hold.
Configure the bandwidth for IAX settings. The default setting is "Low".
Table 112: IAX Settings/Registration
Configure the minimum period (in seconds) of registration. The default setting is
60.
Configure the maximum period (in seconds) of registration. The default setting is
3600.
Configure the number of IAX helper threads. The default setting is 10.
Configure the maximum number of IAX threads allowed. The default is 100.
UCM630X Series User Manual
Version 1.0.2.25
P a g e
|
328

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ucm6301Ucm6302Ucm6304Ucm6308Ucm630x series

Table of Contents