Payload; Table 104: Internal Options/Payload - Grandstream Networks UCM630 Series User Manual

STUN Server
BFCP UDP Start
BFCP UDP End
BFCP TCP Start
BFCP TCP End
TURN Server
TURN Server Name
TURN Server Password
Connection Protocol

Payload

The UCM630X payload type for audio codecs and video codes can be configured here.
AAL2-G.726
DTMF
G.721 Compatible
G.726
iLBC
OPUS
Audio FEC Payload
Type
Audio RED Payload
Type
H.264
H.265
H.263P
Configure STUN server address. STUN protocol is a Client/Server and also a
Request/Response protocol. It is used to check the connectivity between the
two terminals, such as maintaining a NAT binding entries keep-alive agreement.
The default STUN Server is stun.ipvideotalk.com.
Valid format:
[(hostname | IP-address) [':' port]
The default port number is 3478 if not specified.
Configure BFCP UDP port starting number. The default setting is 50000.
Configure BFCP UDP port ending number. The default setting is 52999.
Configure BFCP TCP port starting number. The default setting is 53000.
Configure BFCP TCP port ending number. The default setting is 55999.
Configure TURN server address. TURN is an enhanced version of the STUN
protocol and is dedicated to the processing of symmetric NAT problems.
Configure turn server account name
Configure turn server account password.
Protocol used to connect to the TURN server.
Table 103: Internal Options/Payload
Configure payload type for ADPCM (G.726, 32kbps, AAL2 codeword packing).
The default setting is 112.
Configured payload type for DTMF. The default setting is 101.
Configure to enable/disable G.721 compatible. The default setting is Yes.
Configure the payload type for G.726 if "G.721 Compatible" is disabled. The
default setting is 111.
Configure the payload type for iLBC. The default setting is 97.
Configure the payload type for OPUS. The default setting is 123.
Configure the Audio FEC Payload Type. The default setting is 127
Configure the Audio RED Payload Type. Default setting is 122
Configure the payload type for H.264. The default setting is 99.
Configure the payload type for H.264. The default setting is 114.
Configure the payload type for H.263+. The default setting is 100 103.
UCM630X Series User Manual
Version 1.0.2.25
P a g e | 314