Manage Devices; Figure 66: Create New Device - Grandstream Networks UCM630 Series User Manual

then be discovered and provisioned. This gives the system administrator adequate time to set up each device
beforehand.
Click on "Add" and the following dialog will show. Follow the steps below to create the configurations for the new
device.
1. Firstly, select a model for the device to be created and enter its MAC address, IP address and firmware
version (optional) in the corresponding field.
2. Basic settings will show a list of settings based on the model selected in step 1. Users could assign
extensions to accounts, assign functions to Line Keys and Multiple-Purposed Keys if supported on the
selected model.
3. Click on "save" to save the configuration for this device.

Manage Devices

The device manually created or discovered from Auto Discover will be listed in the Web GUIValue-added
FeaturesZero ConfigZero Config page. Users can see the devices with their MAC address, IP address,
vendor, model etc.

Figure 66: Create New Device

UCM630X Series User Manual
Version 1.0.2.25
P a g e | 107