Reviewing And Editing Data; Reviewing And Editing Analysis Results And Parameters - Micromeritics AccuPyc 1330 Operator's Manual

AccuPyc 1330

Reviewing and Editing Data

The Review function enables you to review and edit the results of the last
analysis or calibration along with its entered parameters.

Reviewing and Editing Analysis Results and Parameters

Press
September 1996
to review or edit analysis results.
5
Display
Sample ID:
(sample ID)
Sample Weight:
(weight)
Reviewing and Editing Data
Entry
The sample ID is displayed if it is enabled
in the Set-Up function (refer to Report
Options later in this chapter). Press
.
ENTER
This prompt is displayed only if density is
selected for Analysis display mode (refer
to Report Options).
The sample weight entered in the Start
Analysis function is displayed. Press
.
ENTER
4-7