Micromeritics AccuPyc 1330 Operator's Manual page 12

Equipment Description
ZERO
CALIBRATE
MANUAL
SET UP
TRANSMIT
ESCAPE
ANALYZE
REVIEW
PRINT
FILL
EXPAND
VENT
1-6
Table 1-2. Key Combinations
Function Keys
7
8
9
Zero the pressure transducer.
0
•
Calibrate the pycnometer.
Manually control the valves. After
1
pressing the Manual key, you may
use the FILL, EXPAND, and VENT
commands to open and close the
valves.
Display or edit analysis parameters,
2
report options, calibration data, data
transmission parameters, unit types,
operating language, and date and
time.
Transmit analysis or calibration data
3
over the serial line. If an automatic
operation is in progress, transmit a
partial report.
Delete all data entered in the
CLEAR
current mode and return to display
mode. If an automatic operation is
in progress, cancel the operation.
Perform an analysis.
4
Review or edit completed analysis
5
or calibration data.
Print analysis or calibration report.
6
If an automatic operation is in
progress, print a partial report.
Open and close the fill valve. The
(when in
indicator above the FILL key is on
manual
when the valve is open and off
mode)
when the valve is closed.
Open and close the expansion valve.
(when in
The indicator above the EXPAND
manual
key is on when the valve is open
mode)
and off when the valve is closed.
Open and close the vent valve. The
(when in
indicator above the VENT key is on
manual
when the valve is open and off
mode)
when the valve is closed.
AccuPyc 1330
Used To
September 1996