Table of Contents
Advertisement
Chapter 2:
Introduction
The instructions in this manual are designed to assist in the proper calibration and operation
of the DirecSteer system when connected with a Raven SGC (e.g. RS1™, SC1™, or TC1™).
Note:
Installation of the DirecSteer and SGC must be completed before calibrating the
system. Refer to the machine-specific Installation Manual for assistance with installation of
DirecSteer and the SGC.
Installation and Operation Manuals for Raven systems can be downloaded from the Raven
website: https://portal.ravenprecision.com.
Note:
The universal terminal or Raven field computer must be calibrated specifically for
equipment before starting auto-steering operations. Refer to the Operation Manual for the
universal terminal or Raven field computer connected to the auto-steer components.
Introduction
9
Advertisement
Table of Contents
