Profinet Io; Activating Online Operation: Starter Via Profinet Io - Siemens SINAMICS S150 Operating Instructions Manual

Operation

6.8 PROFINET IO

6.8 PROFINET IO
6.8.1

Activating online operation: STARTER via PROFINET IO

Description
The following options are available for online operation via PROFINET IO:
● Online operation via IP
Prerequisites
● STARTER with version ≥ 4.1.1
● Firmware version ≥ 2.5.1
● CBE20
STARTER via PROFINET IO (example)
Figure 6-34
Procedure, establishing online operation with PROFINET
1. Set the IP address in Windows XP
2. Settings in STARTER
3. Assignment of the IP address and the name for the PROFINET interface of the drive unit
4. Select online operation in STARTER.
238
STARTER via PROFINET (example)
The PC/PG is referred here to a fixed, free IP address.
The PROFINET interface must be "baptized" so that the STARTER can establish
communication.
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A