Siemens SINAMICS S150 Operating Instructions Manual page 88

Electrical installation
4.9 Other connections
Connection
Table 4-36
Terminal
T11-T13
T21-T23
T31-T33
T41-T43
T51-T53
T61-T63
51/52/54
61/62/64
Ground _
Ground _
Max. connectable cross-section: 2.5 mm² (AWG 12)
Diagnosis
Messages output during operation and in the event of faults (meaning of LEDs on -A140) are
described in the lug "Additional Operating Instructions" of the Operating Instructions.
88
Terminal block -A1-A140 – connection for evaluation unit PT100 resistors
Designation
OUT 1
U1 OUT 1
I1 OUT 1
OUT 2
U2 OUT 2
I2 OUT 2
Technical specifications
90–240 V AC/DC; PT100; sensor 1; group 1
90–240 V AC/DC; PT100; sensor 2; group 1
90–240 V AC/DC; PT100; sensor 3; group 1
90–240 V AC/DC; PT100; sensor 1; group 2
90–240 V AC/DC; PT100; sensor 2; group 2
90–240 V AC/DC; PT100; sensor 3; group 2
90–240 V AC/DC
Relay output limit value group 1 reached; (changeover contact)
90–240 V AC/DC
Relay output limit value group 2 reached; (changeover contact)
Analog output out 1, sensor group 1
Analog output out 2, sensor group 2
0/4–20 mA
0/2–10V
0/4–20 mA
0/2–10V
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A