Configuring The Drive Unit - Siemens SINAMICS S150 Operating Instructions Manual

5.3.2

Configuring the drive unit

In the project navigator, open the component that contains your drive unit.
Figure 5-12 Project navigator – configuring the drive unit
1. In the project navigator, click the plus sign next to the drive unit that you want to configure.
The plus sign becomes a minus sign and the drive unit configuration options are displayed
as a tree below the drive unit.
2. Double-click Configure drive unit.
Drive converter cabinet units
Operating Instructions, 07/07, A5E00288214A
5.3 Procedure for commissioning via STARTER
Commissioning
127