Chapter 3 System Start-Up Procedure - Mitsubishi MELSEC L Series User Manual

CHAPTER 3
This chapter describes a procedure for starting a system.
Install modules.
Check box
Install a power supply module, a CPU module, I/O modules,
intelligent function modules, branch modules, extension modules,
an END cover, and a display unit.
Install wiring and connect devices.
Connect the following:
Power supply module to the power source
External devices to the CPU module, I/O modules,
and intelligent function modules
Installation the battery
Connection of extension cables
Power on a system.
Power on the system after checking if:
Wiring for the power source is correct.
Power supply voltage is within the specified range.
The CPU module is in the STOP status.
Connect a personal computer.
Connect the CPU module and a personal computer with
a programming tool installed.
Format a memory.
Format the CPU module memory with a programming tool.
SYSTEM START-UP PROCEDURE
Start
To the next page

CHAPTER 3 SYSTEM START-UP PROCEDURE

Page 31, CHAPTER 4
Page 44, Section 4.3
Page 86, Section 14.3
Operating manual for the
programming tool used
Operating manual for the
programming tool used
3
29