Mitsubishi MELSEC L Series User Manual page 345

(11)Remote password count
Number Name Meaning
Direct
SD979 MELSOFT
connection
SD980
Connection 1 to
to
16
SD995
MELSOFT Count of unlock
SD997 connection processing
using UDP port failures
MELSOFT
SD998 connection
using TCP port
FTP
SD999 communication
port
*1 This applies to the Built-in Ethernet port QCPU.
(12) Conversion from A series to Q or L series
The special register (D9000 to D9255) for ACPU corresponds to the special register (SD1000 to SD1255) for
QCPU or LCPU after the A to Q/L conversion. (Note that the Basic model QCPU and Redundant CPU do not
support the A to Q/L conversion.)
All data in this area of the special register are set by system (cannot be set by user using a program). To set data
by user, correct the program using the special register for QCPU or LCPU. The special register (D9200 to
D9255), however, includes the areas that can be set by user. For those areas, data can be set by user in the
converted special register (SD1200 to SD1255) as well. For details on the special register for ACPU, refer to the
following.
User's manual for the CPU module used
Type MELSECNET, MELSECNET/B Data Link System Reference Manual
To use the converted special register in the High Performance model QCPU, Process CPU, Universal model QCPU, or
LCPU, check "Use special relay/special register from SM/SD1000" under "A-PLC Compatibility Setting".
Project window
Note that the processing time will increase when the converted special register is used.
[How to read the Special Register for Modification column]
• If the special register number for QCPU or LCPU is provided, correct the program using it.
• means that the converted special register can be used.
• means that the special register cannot be used in QCPU or LCPU.
Explanation
This register stores the number of mismatched password
entries.
Range: 0 to 0FFFE (0FFFF
H H
[Parameter] [PLC Parameter]
(When Set)
when the range is exceeded)
[PLC System]
APPENDICES
Corre-
Corre-
sponding
Set by
sponding
ACPU
CPU
D9
S
*1
QnU
(Status New
LCPU
change)
343
A