Mitsubishi MELSEC L Series User Manual page 237

Error code
Error item
(Hexadecimal)
41D1
H
41D4
H
41D5
H
41D6
H
41D7
H
41D8
H
41DF
H
41E0
H
File-related
errors
41E1
H
41E4
H
41E7
H
41E8
H
41E9
H
41EB
H
41EC
H
41ED
H
41EF
H
Error details
• The file name is specified in a wrong
method.
• The SD memory card is being disabled by
SM606 (SD memory card forced disable
instruction).
The size of the specified file has exceeded
that of the existing file.
The file of the same name exists.
The format information data of the specified
drive (memory) is abnormal.
The format information data of the specified
drive (memory) is abnormal.
The specified file is being accessed.
The specified drive (memory) is write-
protected.
The specified drive (memory) is abnormal or
does not exist.
Access to the flash ROM was unsuccessful.
Access to the memory card was unsuccessful.
The format information data of the specified
drive (memory) is abnormal.
The format information data of the specified
drive (memory) is abnormal.
The specified file is being accessed.
The file name is specified in a wrong method.
The file system of the specified drive
(memory) is logically corrupted.
The specified drive (memory) does not have
continuous free space.
(The free space for file is sufficient but the
continuous free space is insufficient.)
Creation of power failure backup for the
specified drive (memory) was unsuccessful.
Corrective action
• Execute again after checking the file name.
If the error recurs after re-execution, the file
information data may be corrupted.
After backing up the data in the CPU module, format
the CPU module memory.
• Cancel the SD memory card forced disable
instruction.
Execute again after checking the size of the specified
file.
If the error recurs after re-execution, the file information
data may be corrupted.
After backing up the data in the CPU module, execute
programmable controller memory format.
Forcibly execute the request, or execute after changing
the file name.
The file information data may be corrupted.
After backing up the data in the CPU module, execute
programmable controller memory format.
The file information data may be corrupted.
After backing up the data in the CPU module, execute
programmable controller memory format.
Execute again after a while.
Execute again after canceling the write protect of the
specified drive (memory).
• Execute again after checking whether the memory
card has been installed.
• After backing up the data, execute programmable
controller memory format.
• After backing up the data, execute write to PLC (Flash
ROM).
• Execute again after checking whether the specified
drive is the Flash ROM card and whether the memory
card size is correct.
• Execute again after checking whether the memory
card has been installed.
• Execute again after replacing the memory card.
• After backing up the data, execute programmable
controller memory format.
The file information data may be corrupted.
After backing up the data in the CPU module, execute
programmable controller memory format.
The file information data may be corrupted.
After backing up the data in the CPU module, execute
programmable controller memory format.
Execute again after some time.
Execute again after checking the file name.
The file information data may have been corrupted.
After backing up the data in the CPU module, execute
programmable controller memory format.
Execute again after deleting unnecessary files or
executing programmable controller memory
arrangement.
Execute again after checking whether the memory card
has been installed.
APPENDICES
A
235