Mitsubishi MELSEC L Series User Manual page 229

Error code
Error item
(Hexadecimal)
4132
H
4133
H
4134
H
4135
H
4136
H
4137
H
4138
H
File-related
errors
4139
H
413A
H
413B
H
413C
H
413D
H
413E
H
413F
H
Intelligent
414A function
H
module
specification
414C
H
error
4150
H
File-related
errors
4151
H
Error details
The specified number of files does not exist.
The specified drive (memory) has no free
space.
The attribute specification data of the file is
wrong.
The date/time data of the peripheral device
(personal computer) is beyond the range.
The specified file already exists.
The specified file is read-only.
Simultaneously accessible files exceeded the
maximum.
The size of the specified file has exceeded
that of the existing file.
The specified file has exceeded the already
existing file size.
The same file was simultaneously accessed
from different programming tools.
The specified file is write-inhibited.
The specified file capacity cannot be secured.
Operation is disabled for the specified drive
(memory).
The file is inhibited from write to the standard
RAM.
Operation was executed for the intelligent
function module of the non-control group in the
multiple CPU system.
The I/O address of the specified CPU module
is wrong.
An attempt was made to format the drive
protected by the system.
An attempt was made to delete the file
protected by the system.
Corrective action
Execute again after checking the specified data.
Execute again after increasing the free space of the
drive (memory).
Execute again after checking the specified data.
Execute again after checking the clock setting of the
peripheral device (personal computer).
Execute again after checking the specified file name.
Execute again after changing the condition of the
specified file.
Execute again after decreasing file operations.
Execute again after checking the size of the specified
file.
Execute again after checking the size of the specified
file.
Execute again after a while.
Execute again after changing the file condition.
Execute again after increasing the capacity of the
specified drive (memory).
Execute again after changing the target drive (memory).
Execute again after changing the specified drive
(memory).
Execute the operation again from the control CPU of the
target module.
Execute again after checking the I/O address of the
specified CPU module.
Do not format the target drive (memory) as it cannot be
formatted.
Do not delete the target file as it cannot be deleted.
APPENDICES
A
227