Mitsubishi MELSEC L Series User Manual page 228

Error code
Error item
(Hexadecimal)
4121
H
4122
H
4123
H
4124
H
4125
H
4126
H
4127
H
4128
File-related
H
errors
4129
H
412A
H
412B
H
412C
H
412D
H
412E
H
412F
H
4130
H
4131
H
226
Error details
The specified drive (memory) or file does not
exist.
The specified drive (memory) or file does not
exist.
The specified drive (memory) is abnormal.
The specified drive (memory) is abnormal.
The specified drive (memory) or file is
performing processing.
The specified drive (memory) or file is
performing processing.
File password mismatch
File password mismatch with copy destination Execute again after checking the file password.
Cannot be executed since the specified drive
(memory) is ROM.
Cannot be executed since the specified drive
(memory) is ROM.
The specified drive (memory) is write-
inhibited.
The specified drive (memory) is write-
inhibited.
The specified drive (memory) does not have
enough free space.
The specified drive (memory) does not have
enough free space.
The drive (memory) capacity differs between
the drive (memory) copy destination and copy
source.
The drive (memory) type differs between the
drive (memory) copy destination and copy
source.
The file name of the file copy destination is the
same as that of the copy source.
Corrective action
Execute again after checking the specified drive
(memory) or file.
Execute again after checking the specified drive
(memory) or file.
Execute programmable controller memory format to
make the drive (memory) normal.
In the case of the Flash ROM, check the data to be
written to the Flash ROM, and write them to the Flash
ROM.
Execute programmable controller memory format to
make the drive (memory) normal.
In the case of the Flash ROM, check the data to be
written to the Flash ROM, and write them to the Flash
ROM.
Execute again after a while.
Execute again after a while.
Execute again after checking the file password.
Execute again after changing the target drive (memory).
Execute again after changing the target drive (memory).
Execute again after changing the write inhibit condition
or drive (memory).
Execute again after changing the write inhibit condition
or drive (memory).
Execute again after increasing the free space of the
drive (memory).
Execute again after increasing the free space of the
drive (memory).
Execute again after checking the drive (memory) copy
destination and copy source.
Execute again after checking the drive (memory) copy
destination and copy source.
Execute again after checking the file names.