Mitsubishi MELSEC L Series User Manual page 358

Number Name
Stores error
IP address
factor when
storage area
SD1298 failing to write
write error
to IP address
factor
storage area
Stores error
IP address
factor when
storage area
SD1299 failing to clear
clear error
IP address
factor
storage area
Number of
Built-in times that data
SD1395 Ethernet port are not read
counter due to receive
buffer full
*1 This applies to the Built-in Ethernet port QCPU.
*2 This applies to the built-in Ethernet port QCPU whose first five digits of serial No. is "11012" or later.
*3 This applies to the built-in Ethernet port QCPU whose first five digits of serial No. is "11082" or later.
*4 This applies to the built-in Ethernet port QCPU whose first five digits of serial No. is "12072" or later.
*5 This applies to the built-in Ethernet port QCPU whose first five digits of serial No. is "12112" or later.
356
Meaning
This register stores an error factor occurred when writing to the
IP address storage area (flash ROM). (Links with SM1294.)
• 0 : No error
H
• 100 : The values of SD1292 to SD1297 are out of the setting
H
range.
• 200 : Write error
H
• 300 : Writing is not available because other function is being
H
executed.
• 400 : Writing is not available because the IP address storage
H
area is being cleared
This register stores an error factor occurred when clearing the IP
address storage area (flash ROM). (Links with SM1297.)
• 0 : No error
H
• 200 : Clear error
H
• 300 : Clearing is not available because other function is being
H
executed.
• 400 : Clearing is not available because the IP address storage
H
area is being written.
This register stores the number of times that packet data are not
read due to receive buffer full.
Range: 0 to 65535 (0000
Explanation
to FFFF )
H H
Corre-
Corre-
sponding
Set by
sponding
(When Set) ACPU
D9
QnU
S
(Status New
change)
QnU
CPU
*3
*4