Lock Levels
Lock levels are used to limit patient access to certain programming
and operating functions. The table on the next page lists the func-
tions that are accessible in Lock Level 0 (LL0), Lock Level 1 (LL1),
and Lock Level 2 (LL2). When a function is accessible, the key
associated with the function beeps when pressed. If a function is not
accessible, the pump ignores the key press and a beep does not
sound. Section 2, Pump Setup and Programming, describes how to
change the lock level.
Security Codes
The following security codes are preset by the manufacturer for the
clinician's use:
** text omitted from online version **
WARNING: Do not disclose to the patient the pump's
security codes or any other information that would allow
the patient complete access to all programming and operat-
ing functions. Improper programming could result in death
or serious injury to the patient.
Section 1: General Description
9
Need help?
Do you have a question about the CADD-Legacy PLUS and is the answer not in the manual?