Turning The Copy Management Function On/Off; Changing The Copy Management Default Settings - Kyocera KM-C4008 Operation Manual

Section 7 COPIER MANAGEMENT
Turning the copy management function
ON/OFF
Perform the following procedure when you want to turn copy
management ON or OFF.
1
Access the copy management menu screen.
(See "Accessing the copy management menu screen"
on page 7-3.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
2
To turn copy management ON, press the "On" key. To turn
copy management OFF, press the "Off" key.
Inch specifications
Management
Managem. Total
Management Each Mgt.
total Total
Default setting
Metric specifications
Management
Managem. Total
Management Each Mgt.
total Total
Default setting
3
Press the "Close" key.
7-28
Language Management
MP tray Counter
setting check
User
Register Print
orig. size report Adjustment
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Register/Sett.
Management
Management Management
Off
edit Def. Set.
On
Register/Sett.
Management
Management Management
Off
edit Def. Set.
On
Changing the copy management default
settings
Perform the following procedure when you want to change the
default settings for the copy management function.
The following default settings are available.
• Copier function management ON/OFF (Page 7-29.)
• Printer function management ON/OFF (Page 7-30.)
• Printer error report (Page 7-31.)
• Non-standard printer driver printout (Printer) (Page 7-32.)
• Copy/Printer output management (Page 7-33.)
• Scanner function management ON/OFF (Page 7-34.)
• Fax function management ON/OFF (Page 7-35.)
End • Response to exceeded restriction (Page 7-36.)
• Default copy limit (Page 7-37.)
• Total count for specified paper size (1 to 5) (Page 7-38)
Accessing the copy management default
settings
1
Access the copy management menu screen.
(See "Accessing the copy management menu screen"
nd
on page 7-3.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
lose
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
lose
Language Management
MP tray Counter
setting check
User
Register Print
orig. size report Adjustment
Language Management
Bypass Counter
setting check
Register Print User
orig. size report Adjustment
End
nd