Turning The Copy Management Function On/Off; Changing The Copy Management Default Settings - Kyocera KM-3035 Operation Manual

(5) Turning the copy management function ON/OFF

Perform the following procedure when you want to turn copy
management ON or OFF.
1 Access the copy management menu screen.
(See "(2) Accessing the copy management menu screen" on
page 6-3.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
2 To turn copy management ON, touch the "On" key. To turn
copy management OFF, touch the "Off" key.
Inch specifications
Management
Managem. Total
Management Each Mgt.
total Total
Default setting
Metric specifications
Management
Managem. Total
Management Each Mgt.
total Total
Default setting
3 Touch the "Close" key.
Language Management
Bypass BOX Counter
setting Management check
Register Print User
orig. size report Adjustment
Language Management
Bypass Hard Disk Counter
setting Management check
Register Print User
orig. size report Adjustment
Close
Register/Sett. Management
Management Management
edit Def. Set.
Off
On
Close
Register/Sett. Management
Management Management
edit Def. Set.
Off
On
Section 6 COPIER MANAGEMENT FUNCTIONS

(6) Changing the copy management default settings

Perform the following procedure when you want to change the default
settings for the copy management function.
The following default settings are available.
• Copier function management ON/OFF (Page 6-26.)
• Printer function management ON/OFF (Page 6-27.)
• Printer error report (Page 6-28.)
• Non-standard printer driver printout (Printer) (Page 6-29.)
• Copy/Printer output management (Page 6-30.)
• Scanner function management ON/OFF (Page 6-31.)
• Fax function management ON/OFF (Page 6-32.)
End
• Response to exceeded restriction (Page 6-33.)
• Default copy limit (Page 6-34.)
• Total count for specified paper size (1 to 5) (Page 6-35)
● Accessing the copy management default settings
1 Access the copy management menu screen.
(See "(2) Accessing the copy management menu screen" on
page 6-3.)
End
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Language Management
Bypass BOX
setting Management
Document Register Print
Management orig. size report
Language Management
Bypass Hard Disk
setting Management
Document Register Print
Management orig. size report
End
Counter
check
User
Adjustment
End
Counter
check
User
Adjustment
6-25