Copy Default; Density Mode; Original Image Quality; Eco Print Mode On/Off - Kyocera TASKalfa 181 Service Manual

2KJ/2KH

(3) Copy default

Density mode

Selects the exposure mode at power-on.
1. Select [Exposure Mode] and then press the enter
key.
2. Select [Manual] or [Auto] and then press the enter
key.

Original image quality

Selects the original image quality at power-on.
1. Select [Orig Image] and then press the enter key.
2. Select [Text+Photo], [Photo] or [Text] and then
press the enter key.

Eco print mode ON/OFF

Determines whether or not the eco print mode will be
the default setting in the initial mode.
1. Select [EcoPrint] and then press the enter key.
2. Select [On] or [Off] and then press the enter key.
Background color adjustment
Adjust the ground color of the copied paper.
1. Select [Background adjst] and then press the enter
key.
2. Adjust the exposure and then press the enter key.
Setting range: 1 to 5
Paper selection
Sets whether the copier will automatically select the
same size of copy paper as the original once an origi-
nal is set, or whether the designated default drawer will
be automatically selected.
1. Select [Paper Select] and then press the enter key.
2. Select [Auto] or [Default cassette] and then press
the enter key.
Paper type (Auto paper selection mode)
Selects the types of paper that will be available for
selection under the APS (Auto Paper Selection) mode.
1. Select [Paper type(Auto)] and then press the enter
key.
2. Select [On] or [Off] and then press the enter key.
3. If selected [On], select the desired paper type and
then press the enter key.
Default cassette
Sets one cassette that will be selected automatically
regardless of the size of paper loaded in that cassette.
1. Select [Default cassette] and then press the enter
key.
2. Select the drawer that will be used with priority.
Settings: Cassette 1/Cassette 2/Cassette 3/ Cas-
sette 4
1-3-70
Default magnification
Sets whether or not the appropriate magnification ratio
to be calculated automatically when selecting the size
of copy paper.
1. Select [Default magnif.] and then press the enter
key.
2. Select [100%] or [Auto %] and then press the enter
key.
Auto density adjustment
Adjusts the overall density level for the auto density
mode.
1. Select [Adj.Auto dens] and then press the enter
key.
2. Adjust the density and then press the enter key.
Setting range: 1 to 7
Auto density adjustment (OCR)
Adjusts the overall density level for scanning with OCR
(Optical Character Recognition) software when using
the optional scanner functions of this machine.
1. Select [Auto dens(OCR)] and then press the enter
key.
2. Adjust the density and then press the enter key.
Setting range: 1 to 7
Density adjustment for Text + Photo originals
Adjusts the median density value when the text+photo
mode is selected for the image quality.
1. Select [Txt+Photo Dens] and then press the enter
key.
2. Adjust the density and then press the enter key.
Setting range: 1 to 7
Density adjustment for Text originals
Adjusts the median density value when the text mode
is selected for the image quality.
1. Select [Txt Ori Density] and then press the enter
key.
2. Adjust the density and then press the enter key.
Setting range: 1 to 7
Density adjustment for Photo originals
Adjusts the median density value when the photo mode
is selected for the image quality.
1. Select [Photo Ori Dnsity] and then press the enter
key.
2. Adjust the density and then press the enter key.
Setting range: 1 to 7
Collate copying
Determines whether or not the Sort mode will be the
default setting in the initial mode.
1. Select [Collate] and then press the enter key.
2. Select [On] or [Off] and then press the enter key.