HPE ProLiant DL20 Gen10 Plus User Manual page 83

9. Secure the power cord, wires, and cables in the strain relief strap attached to the power supply handle:
a. Unwrap the strain relief strap from the power supply handle.
CAUTION: Avoid tight bend radii to prevent damaging the internal wires of a power cord or a server cable. Never CAUTION:
bend power cords and server cables tight enough to cause a crease in the sheathing.
b. Secure the power cord, wires, and cables with the strain relief strap. Roll the extra length of the strap around the power supply
handle.
10. If you are installing a power supply in the power supply bay 2, remove the power supply blank.
Retain the blank for future use.
Installing a DC power supply 83