Table of Contents
Advertisement
13. Install the riser cage.
14. Connect all necessary internal cabling to the expansion card. For more information on these cabling requirements, see the
documentation that ships with the option.
15. Install the access panel .
16. Install the server into the rack .
17. Connect all peripheral cables to the server.
18. Connect the power cords:
a. Connect each power cord to the server.
b. Connect each power cord to the power source.
19. Power up the server .
20. If removed, install the front bezel .
This installation is complete.
Installing an expansion card
132
Advertisement
Table of Contents
Troubleshooting
