Using The Uid Button To View The Server Health Summary - HPE ProLiant DL20 Gen10 Plus User Manual

Using the UID button to view the Server Health Summary

Using the UID button to view the Server Health Summary
You can use the UID button to display the iLO Server Health Summary screen on an external monitor. This function works both when
the server is powered on or off. Use this feature for troubleshooting if the server will not start up.
CAUTION: Press and release the UID button. Holding it down at any time for more than five seconds initiates a graceful CAUTION:
iLO reboot or a hardware iLO reboot. Data loss or NVRAM corruption might occur during a hardware iLO reboot.
Prerequisites Prerequisites
An external monitor is connected.
In the iLO web interface, the Show Server Health on External Monitor feature is enabled on the Access Settings page.
Procedure Procedure
1. Press and release the UID button.
The Server Health Summary screen is displayed on the external monitor. For more information, see the iLO troubleshooting guide
on the Hewlett Packard Enterprise website ( https://www.hpe.com/support/ilo-docs
2. Press the UID button again to close the Server Health Summary screen.
https://www.hpe.com/support/ilo-docs).
Using the UID button to view the Server Health Summary 13