Table of Contents
Advertisement
Example 2: Provide Unique Day and Night Dialing Options for Callers
■
All Call Routing Mailboxes (000-007 by default) use
■
Dial Action Table 1 provides the following dial options:
-
Dial extension number (
-
Dial
for the operator.
0
-
Dial * + extension to leave a
-
Dial # + extension to do a
-
to operator if no digits dialed.
Timeout
■
Allow callers at night to
Step 1
Set up separate day and night greetings.
1.1
Step 2
Assign a unique Dial Action Table (2) to the night time Call Routing Mailbox (001).
2.1
Step 3
Change the dialing options for the night time Dial Action Table (2).
3.1
IntraMail System Guide
Default Dial Action Table Options
).
300-427
Quick Message
to the mailbox.
Remote Logon
Application Summary
dial 0 to leave a message
Following example 1, set up separate day and night Instruction Menus using Call Routing
Mailboxes 000 and 001.
- The day Instruction Menu can say something like:
Thank you for calling. For Sales, dial 301. For Technical Support, dial 302. To talk to an
operator, dial 0. If you know your party's extension number, please dial it now.
- The night Instruction menu can say something like:
Thank you for calling. Our normal business hours are 8:30 to 5:00, Monday through Fri-
day. To leave us a message, please dial 0 now.
In 8006 - IntraMail Routing Mailboxes: Dial Action Table, assign Dial Action Table 2 to Call
Routing Mailbox 001.
- See 8006 - IntraMail Routing Mailboxes: Dial Action Table on page 228 for more.
In 8008 - Dial Action Table Actions for Dial Action Table 2, make the following changes:
- For the digits 3 and 4, enter 0 for the Action entry to prevent callers from dialing extensions
at night.
- For the digit 0, change the Action entry to
This allows night time callers to dial 0 to leave a message for the operator.
- Note that the * and # entries were left unchanged so that experienced users could still leave
Quick Messages or do Remote Logons at night.
- See 8008 - IntraMail Dial Action Tables on page 246 for more.
Application Examples
.
Dial Action Table 1
.
for the operator.
(by dialing 3) and the Data entry to
REC1
Chapter 1: Quick Setup ◆ 9
Programming
.
300
1
Advertisement
Table of Contents
