Table of Contents
Advertisement
Centrex Transfer
Step 4
Step 5
Operation
Operation is automatic once set up in programming.
60 ◆ Chapter 2: Features
Set the Flash timer for compatibility with the connected Centrex trunks.
0402 - PBX/Centrex Flash
4.1
- Set the flash interval for compatibility with the connected Centrex.
✔
By default, this timer is 800 mS.
Set the Pause timer for compatibility with the Centrex Transfer feature.
0401 - Dialing Pause
5.1
- Set the pause interval for compatibility with the Centrex Transfer feature.
- Normally, you can leave this timer at its default setting.
✔
By default, this timer is 1 second.
IntraMail System Guide
Advertisement
Table of Contents
