NEC IntraMail 4 System Manual page 103

Programming
Step 1
Assign a GOTO action to the active Dial Action Table.
1.1
Operation
For the outside caller:
1. After Automated Attendant answers, the voice prompts will instruct you on which digits to dial.
IntraMail System Guide
8008 - IntraMail Dial Action Tables: GOTO Action - Go to Mailbox (7) on page 249.
- To have Automated Attendant callers dial a single digit to go to a Call Routing or
Announcement Mailbox, enter the mailbox number in the corresponding Number option.
- For example, to have key 1 go to Call Routing Mailbox 001, for key 1 enter GOTO
for the Action and 001 for the corresponding Number.
- To have IntraMail require Automated Attendant callers to enter a Call Routing or
Announcement Mailbox to go to, enter XXX in the corresponding Number option. The key
you choose must represent the first digit in the mailbox numbers.
- For example, to allow callers to go to mailboxes 000-015, for key 0 enter GOTO for
the Action and XXX for the corresponding Number.
- To log into any valid Call Routing or Subscriber Mailbox, enter IXXX in the correspond-
ing Number option.
- For example, to allow callers to dial 1 plus any Call Routing or Announcement Mail-
box number to go to, for key 1 enter GOTO for the Action and IXXX for the corre-
sponding Number.
✔
By default, there are no GOTO actions assigned.
Using the Automated Attendant GOTO Action
Go To A Mailbox
Chapter 2: Features ◆ 93
2