Other Specifications; Filters; Brakes; Transmission Shaft - Hardi AEON CENTURA TWIN FORCE Instruction Book

Table of Contents

Advertisement

Other Specifications

Filters

The higher the number of mesh, the finer the filtration.
Mesh
Mesh Size
18
1.00 mm
30
0.58 mm
50
0.30 mm
80
0.18 mm
100
0.15 mm
*depending on selected nozzles

Brakes

Max. wear rates on brake components:
Sprayer Volume
4200/5200 litres

Transmission Shaft

Options at the tractor hitch point:
A
Dimension: 1 3/8" (35 mm)
1. Yoke with 6 splines.
Normally used for pump working speed = 540 RPM.
2. Yoke with 21 splines.
Normally used for pump working speed = 1000 RPM.
The tractor must follow the international standard ISO 500-1:2014
regarding general specifications, safety requirements, dimensions for
master shield and clearance zone for rear-mounted power take-off types
1, 2, 3 and 4 on agricultural tractors.

Temperature and Pressure Ranges

Spray Liquid System
Operating temperature range
Operating pressure for the safety valve
Operating pressure for the External Cleaning Device safety valve
Max. pressure on the pressure manifold
Max. pressure on the suction manifold
Colour
EasyCleanFilter
White
-
Green
Yes
Blue
Yes
Red
Yes
Yellow
-
Drum Dimensions
412 x 160 mm
2 - 40 °C
15 bar ±1 bar
10 bar ±1 bar
20 bar
1.5 bar
8 - Technical Specifications
Filter Name/Position
CycloneFilter
In-Line
-
-
-
-
-
Yes*
Yes
Yes*
-
Yes*
Max. Drum Diameter
414 mm
Tank Strainer
Nozzle
Yes
-
-
-
-
Yes*
-
Yes*
-
Yes*
Min. Lining Thickness
5.5 mm
203

Advertisement

Table of Contents
loading

Table of Contents