Hardi AEON CENTURA TWIN FORCE Instruction Book page 46

3 - Description
Identification Data
In the schematic, you will find descriptions of the data on the ID plate
corresponding to numbers in this picture.
No. Field Name
1 Model
2 Model Year
3 Capacity
4 Manufacturer Name
5 Homologation No.
6 Type
7 VIN Number
8 Gross Vehicle Mass
9 Vertical Drawbar Load/Axle 0
(A0)
10 Axle 1 (A1)
11 Not Used
12 Not Used
46
Description
A particular design within a sprayer type.
E.g. type of sprayer models are AEON, COMMANDER, NAVIGATOR etc.
Year of shipment from factory.
Rated or nominal content of the MainTank. (The tank is oversized to retain overfilling, foam etc.)
Manufacturer or brand name. The HARDI group currently have two makes:
HARDI INTERNATIONAL A/S and GROUPE HARDI FRANCE.
Reference to the homologation or approval document as issued by the approving authority (e.g. KBA, DREAL etc.). In
France, this field contains the approval date.
Defined type – related to type approvals definition: A grouping based on shared characteristics.
E.g. lift sprayer, trailer sprayer, mist blower, field sprayer, self-propelled sprayer etc.
In homologation and type approval context, the "Type" refers to the particular form and shape of a chassis (i.e. the chassis
drawing number). Can be stated encoded.
Coded Vehicle Identification Number identifies the machine. Includes manufacturer, production year, type and ends with
a continuous serial number. The identification number uniquely identifies one specific sprayer amongst the lot.
Same as laden weight or gross weight. Definition: Weight of a vehicle, fully equipped and serviced, including the weight
of the fuel, lubricants, coolant, vehicle tools and spares, crew, personal equipment, and load. Determined by design,
dimensioning and/or homologation.
The vertical load from the trailer drawbar applied to the tractor's towing bar or hitch (for trailers). Determined by design,
dimensioning and/or type approvals.
In type approval context, the trailer drawbar is considered to be an "axle", so the drawbar will be Axle 0, and the first "real"
axle will be Axle 1.
Axle number is counted from front to rear.
Axle load on first axle after the towing eye (for trailers) counted from front towards rear.
Reserved for future use.
This matrix is used for designation of max. load for a trailer attached to the sprayer, for different sprayer brake systems. As
attaching a trailer to a sprayer from the HARDI group is not possible, these fields are not filled with any data.
- 1 - - 2 - - 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
- 9 -
- 10 -
- 11 -
- 12 -