Table of Contents
Advertisement
6 - Maintenance
10 Hours Service - EasyCleanFilter
This filter has a clogging indicator, but even if this indicator does not
show clogging, the filter mostly needs cleaning every 10 hours.
÷
NOTE! The controller will show a service interval message, when
it is time for cleaning the filter.
Servicing the Filter
1. Turn the filter lid counter-clockwise to open it.
2. Remove lid and filter from the filter housing.
3. Separate filter element from lid/filter guide by turning locks (A)
outwards.
4. Clean filter and if necessary clean the housing for larger impurities.
To Reassemble
1. Grease the O-ring on the filter lid.
2. Press the filter onto the filter guide/lid. Make sure that it has caught
the guide. Locks (A) are turned inwards.
3. Reassemble filter/filter lid into the housing. Make sure that it has
caught the guide in the bottom of the housing.
4. Turn the filter lid clockwise to close it.
±
WARNING! Always wear protective clothing and gloves before
servicing the filter!
μ
ATTENTION! If you have difficulties with opening the filter, there is
another way to handle it.
See "Emergency Operation - EasyCleanFilter" on page 197.
154
Advertisement
Table of Contents
