Warning Signs On The Sprayer; Explanation Of Labels - Hardi AEON CENTURA TWIN FORCE Instruction Book

Table of Contents

Advertisement

2 - General Safety Instructions

Warning Signs On The Sprayer

Explanation of Labels

The labels on the sprayer are designating potential dangerous areas on the machine. Operators, or anyone in close range of
the sprayer, must respect these warnings!
The labels should always be clean and readable! Worn or damaged labels must be replaced with new ones. Contact your
HARDI dealer for new labels.
Not all labels shown hereafter will apply to your sprayer - this depends on the sprayer model and variant.
Chemical handling!
Carefully read the informations about
chemical preparation before handling the
machine. Observe instructions and safety
rules when operating.
Service!
Turn off the engine and remove ignition key
before performing maintenance or repair.
Risk of death!
Do not attempt to enter tank.
Risk of injury!
Do not open or remove safety shields while
engine is running.
Risk of injury!
Keep sufficient distance away from electrical
power lines.
18
Service!
Carefully read the Instruction Book before
handling the machine. Observe instructions
and safety rules when operating.
Service!
Tighten to the torque according to instruction
book.
Risk of burn!
Stay clear of hot surfaces.
Risk of injury!
Flying objects - keep a safe distance from the
machine, as long as the engine is running.
Risk of injury!
Keep hands away.

Advertisement

Table of Contents
loading

Table of Contents