Filling The Rinsetank; Filling The Cleanwatertank - Hardi AEON CENTURA TWIN FORCE Instruction Book

Filling the RinseTank

Two RinseTanks are fitted to the sprayer, and are filled via the 1" threaded
connection piece (A):
1. Remove the filler cap for
to the threaded connection piece (A).
2. Start filling with tap water.
3. Keep an eye on the level at the indicator (C) or at the FluidBox
display, in order not to overfill the tank.
4. Stop filling and refit the cap.
Volume: approximately 560 litres.
μ
ATTENTION! Only fill the RinseTank with clean water! To avoid
algae developing in the tanks. Always drain the RinseTank, if the
sprayer is not in use for a longer period.
μ
ATTENTION! For cleaning and inspection purpose, the RinseTank
is accessible via the tank lid (B) on top of the tanks.

Filling the CleanWaterTank

A CleanWaterTank is integrated into the WorkZone on the sprayers left
side.
To fill the CleanWaterTank:
1. Remove the tank lid (A).
2. Fill with clean water.
3. Refit the tank lid.
For use of water:
• Turn the lever (B) to open the ball valve. The water runs from the
tap.
The water from this tank is for hand washing, cleaning of clogged
nozzles etc.
±
WARNING! Although the CleanWaterTank is only filled with clean water, this water must NOT be used for drinking.
μ
ATTENTION! Only fill the CleanWaterTank with clean water! To avoid algae developing in the tank. Always drain the
CleanWaterTank, if the sprayer is not in use for a longer period of time.
, and then fit the external water hose
5 - Operation
117