Hardi AEON CENTURA TWIN FORCE Instruction Book page 172

6 - Maintenance
Reassemble Nozzle Holder
1. Lubricate the O-ring all the way around using a silicone lubricant.
2. Place the O-ring inside the lower part.
3. Place the lower part on the nozzle pipe, so that the O-ring fits
around the hole in the nozzle pipe, where the spray liquid exits to
the nozzle holder.
4. Place the upper part on the opposite side of the nozzle pipe.
5. Press the parts together until they interlock.
6. Insert the locking piece in the upper part to secure it on the spray
boom.
172