Hardi AEON CENTURA TWIN FORCE Instruction Book page 144

5 - Operation
12. Clean the sprayer with the spray gun (A).
13. After cleaning, turn the ball valve (C) to position (E) to close again.
14. Unroll the hose on the reel (B) again.
15. Place the spray gun (A) in the storage position (F).
÷
NOTE! If using the spray gun activates the safety valve, then lower
the PTO speed to minimize the amount of rinsing water returned
into the MainTank.
μ
ATTENTION! If the sprayer is cleaned with a high-pressure washer,
lubrication of the entire machine is recommended afterwards.
144