NEC mPD178054 Series User Manual page 258

8-bit single-chip microcontrollers
Table of Contents

Advertisement

A.5 Debugging Tools (Hardware) (2/2)
(2) When using the in-circuit emulator IE-78001-R-A
IE-78001-R-A
In-circuit emulator
IE-70000-98-IF-C
Interface adapter
IE-70000-PC-IF-C
Interface adapter
IE-70000-PCI-IF-A
Interface adapter
IE-78000-R-SV3
Interface adapter
IE-178054-NS-EM1
Emulation board
IE-78K0-R-EX1
Emulation probe
conversion board
EP-78230GC-R
Emulation probe
EV-9200GC-80
Conversion socket
(Refer to Figures
A-2, A-3)
Remark EV-9200GC-80 is sold in five-unit sets.
258
APPENDIX A DEVELOPMENT TOOLS
The in-circuit emulator serves to debug hardware and software when developing
application systems using a 78K/0 Series product. It corresponds to integrated debugger
(ID78K0). This emulator should be used in combination with emulation probe and
interface adapter, which is required to connect this emulator to the host machine.
This adapter is required when using the PC-9800 series computer (except notebook
type) as the IE-78001-R-A host machine (C bus compatible).
This adapter is required when using the IBM PC/AT compatible computers as the IE-
78001-R-A host machine (ISA bus compatible).
This adapter is required when using a PC with a PCI bus as the IE-78001-R-A host
machine.
This is adapter and cable required when using an EWS computer as the IE-78001-R-
A host machine, and is used connected to the board in the IE-78000-R-A.
TM
As Ethernet
, 10Base-5 is supported. With the other method, a commercially available
conversion adapter is necessary.
This board emulates the operations of the peripheral hardware peculiar to a device. It
should be used in combination with an in-circuit emulator and emulation conversion
board.
This board is required when using the IE-178054-NS-EM1 on the IE-78001-R-A.
This probe is used to connect the in-circuit emulator to the target system and is designed
for 80-pin plastic QFP (GC-8BT type).
This conversion socket connects the EP-78230GC-R to the target system board
designed to mount an 80-pin plastic QFP (GC-8BT type).
User's Manual U15104EJ2V0UD

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mpd178053Mpd178054Mpd178f054

Table of Contents