Pair New Transmitter - Dexcom G5 User Manual

For more information on setting your sound/vibration prompts and how to clear them, please see Chapter 9.
Smart Device
Your smart device prompts you with a triple beep. If not cleared, you receive the triple beep twice, five minutes apart.
Receiver
The receiver alerts you with an initial vibration prompt. If not cleared, you receive a vibrate/beep twice, five minutes apart.

8.6 Pair New Transmitter

After the transmitter battery has died and before starting a new sensor session, you need to pair your new transmitter with your
display device(s). In Chapter 5 you learned how to pair your transmitter using the set up wizard. But how do you pair a new
transmitter once your display device is set up?
Part of pairing the transmitter is entering it's SN into your display device, inserting the sensor, and attaching the transmitter.
After the transmitter and display device are paired,start a new sensor session.
App
Step What you see
1
2
3
Dexcom G5 Mobile System User Guide
Ending Your Sensor Session and Transmitter Session
What you do
Menu
Tap
Settings
Tap
Tap Transmitter
133