Stopping Work (End Of Daily Production) - Leica PaveSmart 3D User Manual

2.13
After Production


Warning
Getting Started

Stopping Work (End of Daily Production)

To Stop Tracking, press and hold Stop for one second.
The Stop button now displays Exit. Press and hold Exit for more than 1 second to display
the Shutdown/Restart options dialog. Select Shutdown to exit PaveSmart 3D and power-
off the MPC1310.
Never power off the MPC1310 by holding down the Power Key! Always shut down the
MPC1310 by using the Exit button to ensure all data are saved. Incorrect shutdown of the
MPC1310 may risk unexpected data loss or corruption of the Windows system files!
After approx. 30 seconds when the MPC1310 display is black, turn off power.
Disconnect the power/data cables, radio cables.
Store all equipment in the MPC1310 carrycase.
Fit dust/water caps for machine-mounted connectors, where provided, to prevent rain or
condensation build-up which may lead to electrical problems.
Due to the risk of theft, lightning-strikes or vandalism, we strongly recommend removal of
the radios, GPS and MPC1310 computer overnight.
If MPC1310, radios and cables are wet, only close the carry-case for a short period, while
removing the equipment from the machine. It is essential to ensure the carry-case is left
open overnight, to allow the equipment to dry out.
PaveSmart 3D UM 77