Leica PaveSmart 3D User Manual page 105

Troubleshooting
Problem Possible cause(s)
Position offsets • Wrong Job or reference line is
are wrong chosen
• Offsets are wrong
Slopes and eleva- • After paving for a long period
tions become the geometry of the machine
gradually impre- may change (mold settles,
cise while paving wear and tear, vibration etc.)
• Instrument adjustment drift
No log files saved • Disk space full
• Log files have not been prop-
erly activated
Strange behaviour • System crashed (power supply) • Close system. Restore the
- wrong machine
parameters saved
Machine starts to • Too much head of concrete,
undulate during asphalt or subgrade in front of
paving machine
• Hydraulic lift pressure incorrect
Suggested remedies
• Check the chosen Job in the Job
dialog
• Check the chosen reference line
• Check the steering offsets
• Check and readjust mold slope
sensor regularly
• Readjust robot(s)
• Delete unnecessary data in the
Manage dialog
configuration settings.
• Reduce head of material, refer to
machine manual, check hydraulic
system
PaveSmart 3D UM 105