Importing jobs from
USB Port
Getting Started
Before creating a new Project name, you must first have the design data available in DBX
format on the external USB data stick in the \DBX folder. If the \DBX folder does not already
exist on the stick, use Windows Explorer to create the folder.
The USB port (labelled USB A) is located on the bottom of the MPC1310. Connect your USB
storage device with the prepared design data on it to the USB port on the MPC1310.
The design data must be stored on the storage device in a folder named \DBX.
a
b
a) MPC1310
b) USB storage device
PaveSmart 3D UM 39