Leica PaveSmart 3D User Manual page 106

Troubleshooting
Problem Possible cause(s)
Machine height is • Hydraulic tuning parameters
controlled in incorrect
wrong direction
• Slope sensor mounted in the
e.g. correction up
wrong direction
-> machine goes
down and vice
versa
Robot or GPS • Battery has previously only
Battery does not been partially discharged
hold charge before recharging
• Suffering from memory effect
PaveSmart 3D UM 106
Suggested remedies
• Contact Leica Geosystems
• Reset the default tuning param-
eter in elevation and Steer.
Retune machine before paving
• Refer to the charger manual for
discharge/recharge cycle instruc-
tions