Continue Working Depending On The Current Machine Position - Leica PaveSmart 3D User Manual

Getting Started
2.7
Introduction

Continue Working Depending on the Current Machine Position

The "Here" function is available for the milling application and is used especially in milling
tasks when it is required to work in parallel lanes. The lanes depend on the milling head
width and not on the design data. The function is used when one lane is finished, and the
operator wants to turn the machine around and work along an existing edge. The operator
can use the Here function, which brings the steering correction to zero by changing the
steering offset. The function is also available for elevation and cross slope or all together.
PaveSmart 3D UM 50