Table of Contents
Advertisement
Getting Started
Checking the Status of
GPS
Tie point check function is not available for all instruments.
In Main Menu: Sensors \ GPS the following status information is available:
The machine operator enters in the <Position Quality:> the maximum value for the posi-
tion tolerance and in the <Height Quality:> the maximum value for the height toler-
ance.<Heading Quality:> the maximum value for the heading tolerance, only available
when the Advanced Heading (1Up) is defined and selected. As soon as these values are
exceeded, an error message is sent to the dashboard.
PaveSmart 3D UM 68
Advertisement
Table of Contents
