Leica PaveSmart 3D User Manual page 17

Center section
Config dialog
Service dialog
Work Dialog
Getting Started
The center section provides a fast overview of the current setup.
Field
SW Version
CCP Expiry
License Expiry
Current Project
Reference Model
Current Log File
Machine
Machine Type
Controller
Optional protected by a password which can be set in the Settings/General dialog,
containing settings which are usually not used in daily production and should only be edited
by a trained system administrator (n.b. Default password = 007).
Password protected menu for Leica support personnel only.
Depending on the machine type, a different machine profile is loaded. Milling, Concrete
Curb&Gutter, Concrete Mainline Paver, Road (Asphalt) Paver or Trimmer Profiles are avail-
able, depending on the Licences purchased. Further licences can be purchased through your
Leica Machine Control sales representative.
The Work dialog screen shows all the information needed while the machine is in operation.
Description
The build number of the software. Please quote this
number to support.
The date of expiry for maintenance contract.
The next expiry date for any active license.
The file name of the currently loaded project.
The currently loaded model from the loaded project.
The name of the log file currently being created.
The machine currently in use.
The machine type currently in use.
The controller type currently in use.
PaveSmart 3D UM 17